• Piotr Dymacz's avatar
    ath79: add support for TP-Link RE350K v1 · db914187
    Piotr Dymacz authored
    TP-Link RE350K v1 (FCC ID: TE7RE350K) is a wall-plug AC1200 Wi-Fi range
    extender with 'Kasa Smart' support. Device is based on Qualcomm/Atheros
    QCA9558 + QCA9882 + AR8035 platform and is available only on US market.
    - 720/600/200 MHz (CPU/DDR/AHB)
    - 128 MB of RAM (DDR2)
    - 16 MB of flash (SPI NOR)
    - 1x 1 Gbps Ethernet (AR8035)
    - 2T2R 2.4 GHz (QCA9558), with ext. PA (SE2565T) and LNA (SKY65971-11)
    - 2T2R 5 GHz (QCA9882), with ext. PA (SE5003L1-R) and LNA (SKY65981-11)
    - 2x U.FL connector on PCB
    - 2x dual-band PCB antennas
    - 1x LED, 2x dual-color LED (all driven by GPIO)
    - 3x button (app config, led, reset)
    - 1x mechanical on/off slide switch
    - 1x UART (4-pin, 2.54 mm pitch) header on PCB
    - 1x JTAG (8-pin, 1.27 mm pitch) header on PCB
    Flash instruction:
    Use 'factory' image directly in vendor GUI (default IP:,
    default credentials: admin/admin).
    This device does not include any kind of recovery mechanism in U-Boot.
    Vendor firmware access:
    You can access vendor firmware over serial (RX line requires jumper
    resistor in R306 place, near XTAL) with: root/sohoadmin credentials.
    Signed-off-by: default avatarPiotr Dymacz <pepe2k@gmail.com>