Skip to content
  • Mario Schroen's avatar
    ath79: Add support for TP-Link CPE210 v3 · 5ec205d7
    Mario Schroen authored
    
    
    Specifications:
    
        * SoC: Qualcomm Atheros QCA9533 (650MHz)
        * RAM: 64MB
        * Storage: 8 MB SPI NOR
        * Wireless: 2.4GHz N based built into SoC 2x2
        * Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN
    
    Installation:
        Flash factory image through stock firmware WEB UI or TFTP
        To get to TFTP recovery just hold reset button while powering
        on for around 4-5 seconds and release.
        Rename factory image to recovery.bin
        Stock TFTP server IP:192.168.0.100
        Stock device TFTP adress:192.168.0.254
    
    Thanks to robimarko for the work inside the ar71xx tree.
    Thanks to adrianschmutzler for deep discussion and fixes.
    
    Signed-off-by: default avatarMario Schroen <m.schroen@web.de>
    [Split into DTS/DTSI, read-only config partition in DTSI]
    Signed-off-by: default avatarAdrian Schmutzler <freifunk@adrianschmutzler.de>
    [renamed dtsi filename, light subject touches]
    Signed-off-by: default avatarPetr Štetiar <ynezz@true.cz>
    5ec205d7