Skip to content

GitLab

Switch branch/tag
  1. 26 Nov, 2019 4 commits
    • Adrian Schmutzler's avatar
      ath79: Add support for TP-Link Archer C60 v1 · 70233e3a
      Adrian Schmutzler authored 
      

TP-Link Archer C60v1 is a dual-band AC1350 router,
based on Qualcomm/Atheros QCA9561+QCA9886.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 7x LED, 2x button
- UART header on PCB

Flash instruction (WebUI):
Download *-factory.bin image and upload it via the firmwary upgrade
function of the stock firmware WebUI.

Flash instruction (TFTP):
1. Set PC to fixed ip address 192.168.0.66
2. Download *-factory.bin image and rename it to tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.

Flash instruction under U-Boot, using UART:
1. tftp 0x81000000 ...-sysupgrade.bin
2. erase 0x9f020000 +$filesize
3. cp.b $fileaddr 0x9f020000 $filesize
4. reset
Signed-off-by: default avatarAdrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 6d313da6)
      70233e3a
    • Sungbo Eo's avatar
      base-files: config_generate: split macaddr with multiple ifaces · a2d9de21
      Sungbo Eo authored 
      netifd does not handle network.@device[x].name properly if it
contains multiple ifaces separated by spaces. Due to this, board.d
lan_mac setup does not work if multiple ifaces are set to LAN by
ucidef_set_interface_lan.

To fix this, create a device node for each member iface when
running config_generate instead. Those are named based on the
member ifname:

  ucidef_set_interface_lan "eth0 eth1.1"
  ucidef_set_interface_macaddr "lan" "yy:yy:yy:yy:yy:01"

will return

  config device 'lan_eth0_dev'
        option name 'eth0'
        option macaddr 'yy:yy:yy:yy:yy:01'

  config device 'lan_eth1_1_dev'
        option name 'eth1.1'
        option macaddr 'yy:yy:yy:yy:yy:01'

ref: https://github.com/openwrt/openwrt/pull/2542

Signed-off-by: default avatarSungbo Eo <mans0n@gorani.run>
[always use new scheme, extend description, change commit title]
Signed-off-by: default avatarAdrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 298814e6)
      a2d9de21
    • Lech Perczak's avatar
      ar71xx: ubnt-(xm,xw): add rssileds package · 3a5e28bd
      Lech Perczak authored 
      

In order to make RSSI indicator on the device work out of box,
include "rssileds" package in per-device rootfs image by default
for Ubiquiti XM and XW devices, namely:
- Bullet M (XM/XW)
- Rocket M (XM/XW)
- Nanostation M (XM/XW)
- Nanostation Loco-M (XW)

This moves the package addition to the individual devices in order
to prevent accidental inclusions of the package when not looking
at the parent node carefully enough.
Signed-off-by: default avatarLech Perczak <lech.perczak@gmail.com>
[add bullet-m-xw, remove rocket-m-ti, extend commit message]
Signed-off-by: default avatarAdrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 08d9c954)
      3a5e28bd
    • Adrian Schmutzler's avatar
      ath79: add PoE passthrough switch for Ubiquiti Nanostation (XM/XW) · 1cb763c5
      Adrian Schmutzler authored 
      

This adds the gpio switch to enable PoE passthrough on Ubiquiti
Nanostation (XM/XW).

Values are copied from the implementation in ar71xx.

GPIO values checked on:
- NanoStation M5 XW
- NanoStation M2 XM
Signed-off-by: default avatarAdrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 317e98a5)
      1cb763c5
  3. 24 Nov, 2019 7 commits
    • Piotr Dymacz's avatar
      uboot-envtools: ramips: add support for ALFA Network Quad-E4G · a0897f8a
      Piotr Dymacz authored 
      
Signed-off-by: default avatarPiotr Dymacz <pepe2k@gmail.com>
(cherry picked from commit 10bcf1eb)
      a0897f8a
    • Piotr Dymacz's avatar
      ramips: add support for ALFA Network Quad-E4G · 71469caa
      Piotr Dymacz authored 
      

ALFA Network Quad-E4G is a universal Wi-Fi/4G platform, which offers
three miniPCIe (PCIe, USB 2.0, SIM) and a single M.2 B-key (dual-SIM,
USB 3.0) slots, RTC and five Gigabit Ethernet ports with PoE support.

Specification:

- MT7621A (880 MHz)
- 256/512 MB of RAM (DDR3)
- 16/32+ MB of FLASH (SPI NOR)
- optional second SPI flash (8-pin WSON/SOIC)
- 1x microSD (SDXC) flash card reader
- 5x 10/100/1000 Mbps Ethernet, with passive PoE support (24 V) in LAN1
- optional 802.3at/af PoE module for WAN
- 3x miniPCIe slot (with PCIe and USB 2.0 buses, micro SIM and 5 V)
- 1x M.2/NGFF B-key 3042 (USB 3.0/2.0, mini + micro SIM)
- RTC (TI BQ32002, I2C bus) with backup battery (CR2032)
- external hardware watchdog (EM Microelectronic EM6324)
- 1x USB 2.0 Type-A
- 1x micro USB Type-B for system serial console (Holtek HT42B534)
- 11x LED (5 for Ethernet, 5 driven by GPIO, 1x power indicator)
- 3x button (reset, user1, user2)
- 1x I2C (4-pin, 2.54 mm pitch) header on PCB
- 4x SIM (6-pin, 2.00 mm pitch) headers on PCB
- 2x UART2/3 (4-pin, 2.54 mm pitch) headers on PCB
- 1x mechanical power switch
- 1x DC jack with lock (24 V)

Other:

- U-Boot selects default SIM slot, based on value of 'default_sim' env
  variable: '1' or unset -> SIM1 (mini), '2' -> SIM2 (micro). This board
  has additional logic circuit for M.2 SIM switching. The 'sim-select'
  will work only if both SIM slots are occupied. Otherwise, always slot
  with SIM inside is selected, no matter 'sim-select' value.
- U-Boot enables power in all three miniPCIe and M.2 slots before
  loading the kernel
- this board supports 'dual image' feature (controlled by 'dual_image'
  U-Boot environment variable)
- all three miniPCIe slots have additional 5 V supply on pins 47 and 49
- the board allows to install up to two oversized miniPCIe cards (vendor
  has dedicated MediaTek MT7615N/D cards for this board)
- this board has additional logic circuit controlling PERSTn pins inside
  miniPCIe slots. By default, PERSTn (GPIO19) is routed to all miniPCIe
  slots but setting GPIO22 to high allows PERSTn control per slot, using
  GPIO23-25 (value is inverted)

Flash instructions:

You can use the 'sysupgrade' image directly in vendor firmware which is
based on OpenWrt (make sure to not preserve settings - use 'sysupgrade
-n -F ...' command). Alternatively, use web recovery mode in U-Boot:

1. Power the device with reset button pressed, the modem LED will start
   blinking slowly and after ~3 seconds, when it starts blinking faster,
   you can release the button.
2. Setup static IP 192.168.1.2/24 on your PC.
3. Go to 192.168.1.1 in browser and upload 'sysupgrade' image.
Signed-off-by: default avatarPiotr Dymacz <pepe2k@gmail.com>
(backported from commit e68539ac)
      71469caa
    • Piotr Dymacz's avatar
      uboot-envtools: ramips: add support for ALFA Network R36M-E4G · 939dfe61
      Piotr Dymacz authored 
      
Signed-off-by: default avatarPiotr Dymacz <pepe2k@gmail.com>
(cherry picked from commit 3cfea3a3)
      939dfe61
    • Piotr Dymacz's avatar
      ramips: add support for ALFA Network R36M-E4G · c515cd7c
      Piotr Dymacz authored 
      

ALFA Network R36M-E4G is a dual-SIM, N300 Wi-Fi, compact size platform
based on MediaTek MT7620A WiSoC. This product is designed for operation
with 4G modem (can be bought in bundle with Quectel EC25, EG25 or EP06)
but supports also Wi-Fi modules (miniPCIe slot has USB and PCIe buses).

Specification:

- MT7620A (580 MHz)
- 64/128/256 MB of RAM (DDR2)
- 16/32+ MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet, with passive PoE support (24 V)
- 2T2R 2.4 GHz (MT7620A), with ext. LNA (RFFM4227)
- 1x miniPCIe slot (with PCIe and USB 2.0 buses and optional 5 V)
- 2x SIM slot (mini, micro) with detect and switch driven by GPIO
- 2x u.fl antenna connectors (for Wi-Fi)
- 8x LED (7 driven by GPIO)
- 2x button (reset, wifi)
- 2x UART (4-pin/2.54 mm pitch, 10-pin/1.27 mm pitch) headers on PCB
- 1x I2C (4-pin, 1.27 mm pitch) header on PCB
- 1x LED (8-pin, 1.27 mm pitch) header on PCB
- 1x DC jack with lock (12 V)

Other:

- there is a dedicated, 4-pin connector for optional RTC module (Holtek
  HT138x) with 'enable' input, not available at the time of preparing
  support for this board
- miniPCIe slot supports additional 5 V supply on pins 47 and 49 but a
  jumper resistor (R174) is not installed by default
- U-Boot selects default SIM slot, based on value of 'default_sim' env
  variable: '1' or unset -> SIM1 (mini), '2' -> SIM2 (micro). This will
  work only if both slots are occupied, otherwise U-Boot will always
  select slot with SIM card inside (user can override it later, in
  user-space)
- U-Boot resets the modem, using PERSTn signal, before starting kernel
- this board supports 'dual image' feature (controlled by 'dual_image'
  U-Boot environment variable)

Flash instruction:

You can use the 'sysupgrade' image directly in vendor firmware which is
based on OpenWrt (make sure to not preserve settings - use 'sysupgrade
-n -F ...' command). Alternatively, use web recovery mode in U-Boot:

1. Power the device with reset button pressed, the modem LED will start
   blinking slowly and after ~3 seconds, when it starts blinking faster,
   you can release the button.
2. Setup static IP 192.168.1.2/24 on your PC.
3. Go to 192.168.1.1 in browser and upload 'sysupgrade' image.
Signed-off-by: default avatarPiotr Dymacz <pepe2k@gmail.com>
(backported from commit dfecf94c)
      c515cd7c
    • Piotr Dymacz's avatar
      ramips: support dual image feature on ALFA Network boards · 7a62e909
      Piotr Dymacz authored 
      

New U-Boot version for MediaTek MT76x8/MT762x based ALFA Network boards
includes support for a 'dual image' feature. Users can enable it using
U-Boot environment variable 'dual_image' ('1' -> enabled).

When 'dual image' feature is enabled, U-Boot will modify DTB and divide
the original 'firmware' flash area into two, equal in size and aligned
to 64 KB partitions: 'firmware' and 'backup'. U-Boot will also adjust
size of 'firmware' area to match installed flash chip size.

U-Boot will load kernel from active partition which is marked with env
variable 'bootactive' ('1' -> first partition, '2' -> second partition)
and rename both partitions accordingly ('firmware' <-> 'backup').

There are 3 additional env variables used to control 'dual image' mode:
- bootlimit   - maximum number of unsuccessful boot tries (default: '3')
- bootcount   - current number of boot tries
- bootchanged - flag which informs that active partition was changed; if
                it is set and 'bootcount' reaches 'bootlimit' value,
                U-Boot will start web-based recovery which then updates
                both partitions with provided image
Signed-off-by: default avatarPiotr Dymacz <pepe2k@gmail.com>
(backported from commit bc173ddd)
      7a62e909
    • Piotr Dymacz's avatar
      ramips: refresh all subtargets kernel configs · ee71837e
      Piotr Dymacz authored 
      
Signed-off-by: default avatarPiotr Dymacz <pepe2k@gmail.com>
      ee71837e
    • Chuanhong Guo's avatar
      ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB · 3806899a
      Chuanhong Guo authored 
      

Upstream kernel added support for RAW_APPENDED_DTB on ralink arch
in the following commit:
02564fc89d3d ("ralink: Introduce fw_passed_dtb to arch/mips/ralink")

Use upstream solution and get rid of our OWRTDTB hack.
This commit set DEVICE_DTS to $$(DTS) instead of replacing DTS with
DEVICE_DTS in device profile because DTS variable will be dropped
in later commits.
Signed-off-by: default avatarChuanhong Guo <gch981213@gmail.com>
[Tested on mt7621/mt76x8]
Tested-by: default avatarChuanhong Guo <gch981213@gmail.com>
[Tested on rt305x/mt7620]
Tested-by: default avatarINAGAKI Hiroshi <musashino.open@gmail.com>
(cherry picked from commit 7a8d3432

)
Signed-off-by: default avatarPiotr Dymacz <pepe2k@gmail.com>
      3806899a
  5. 23 Nov, 2019 6 commits
  7. 22 Nov, 2019 18 commits
  9. 21 Nov, 2019 5 commits