1. 04 Mar, 2020 3 commits
    • Adrian Schmutzler's avatar
      ramips: add support for NETGEAR R6700v2/AC2400 · 6e80df5e
      Adrian Schmutzler authored
      SoC: MediaTek MT7621AT
      RAM: 256M DDR3
      FLASH: 128M NAND
      WiFi: MediaTek MT7615N an+ac
      MediaTek MT7615N bgn
      ETH: MediaTek MT7621AT
      BTN: 1x Connect (WPS), 1x WLAN, 1x Reset
      LED: Power (white/amber), WAN(white/amber), 2.4G(white), 5G(white),
      USB(white) , GuestWifi(white) 4x LAN(white/amber), Wifi Button(white),
      WPS Button(white)
      
      Installation:
      
      Login to netgear webinterface and flash factory.img
      
      Based on a discontinued GitHub Pull Request by
      kuyokushin <codenamezero@protonmail.com>
      
      https://github.com/openwrt/openwrt/pull/2545
      
      NOTE: Netgear R6700 v2 have five clones: R6900 v2, R7450, Nighthawk
      AC2400, Nighthawk AC2100 and already added R6800. Rest of them  should
      be really easy supportable. Image for R6700v2 should work perfectly with
      them. Please refer:
      
      https://github.com/openwrt/openwrt/pull/2614
      
      
      
      Tested-by: Víctor Gibrán <victorgibranmz@hotmail.com> [R6700v2]
      Tested-by: John Landrum <jl31m10@yahoo.com> [AC2400]
      Signed-off-by: default avatarAdrian Schmutzler <freifunk@adrianschmutzler.de>
      [add guest led to mt7621_netgear_r6700-v2.dts end edit commit message]
      Signed-off-by: default avatarPawel Dembicki <paweldembicki@gmail.com>
      6e80df5e
    • Pawel Dembicki's avatar
      ramips: mt7621: add support for Netgear R6800 · 4e931720
      Pawel Dembicki authored
      
      
      This patch adds support for the Netgear R6800, aka Netgear AC1900 and
      R6800-100PES.
      
      Specification:
      - SoC: MediaTek MT7621AT (880 MHz)
      - Flash: 128 MiB NAND
      - RAM: 256 MiB
      - Wireless: MediaTek MT7615EN b/g/n , MediaTek MT7615EN an+ac
      - LAN speed: 10/100/1000
      - LAN ports: 4
      - WAN speed: 10/100/1000
      - WAN ports: 1
      - USB 2.0
      - USB 3.0
      - Serial baud rate of Bootloader and factory firmware: 57600
      
      Known issues:
      - Device has 3 wifi LEDs: Wifi 5Ghz, Wifi 2.4Ghz and Wifi on/off.
        Wifi on/off is not used.
      
      Installation:
      - apply factory image via stock web-gui.
      
      Back to stock:
      - nmrpflash can be used to recover to the stock Netgear firmware.
      Signed-off-by: default avatarPawel Dembicki <paweldembicki@gmail.com>
      4e931720
    • Kevin Darbyshire-Bryant's avatar
      dnsmasq: bump to v2.81rc1 · 3251ac8f
      Kevin Darbyshire-Bryant authored
      
      
      1st release candidate for v2.81 after 18 months.
      
      Refresh patches & remove all upstreamed leaving:
      
      110-ipset-remove-old-kernel-support.patch
      Signed-off-by: default avatarKevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
      3251ac8f
  2. 03 Mar, 2020 32 commits
  3. 02 Mar, 2020 5 commits