Commit edae3479 authored by ZengFei Zhang's avatar ZengFei Zhang Committed by Mathias Kresin
Browse files

ramips: add support for HiWiFi HC5962

This patch adds supports for the HiWiFi HC5962(gee4) http://www.hiwifi.com



Short specification:

 - MT7621AT + MT7612EN + 7603EN
 - 256MB DDR3 RAM
 - 128MB NAND flash
 - 1+3 x 1000M Ethernet
 - 1x USB 2.0 port. 1x USB 3.0 port.
 - reset button
 - UART pad on PCB (JP3: TX, RX, GND, 3.3V)

Flash instruction:

1, Download lede-ramips-mt7621-hc5962-squashfs-factory.bin
2, Login as root via SSH on 192.168.199.1 and then copy factory.bin(using wget or nc or...) to /tmp/
3, use the following commands:
   $ mtd write /tmp/lede-ramips-mt7621-hc5962-squashfs-factory.bin firmware
   $ mtd erase firmware_backup && reboot
After reboot you should be able to login as root via SSH on 192.168.1.1
Signed-off-by: default avatarZengFei Zhang <zhangzengfei@kunteng.org>
parent 2677b66f
......@@ -80,6 +80,7 @@ ramips_setup_interfaces()
dir-615-h1|\
firewrt|\
hc5661a|\
hc5962|\
hlk-rm04|\
mac1200rv2|\
miwifi-mini|\
......@@ -345,7 +346,8 @@ ramips_setup_macs()
wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
;;
hc5*61|\
hc5661a)
hc5661a|\
hc5962)
lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "`
[ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" 1)
......
......@@ -147,6 +147,9 @@ get_status_led() {
mlwg2)
status_led="$board:blue:system"
;;
hc5962)
status_led="$board:white:status"
;;
linkits7688| \
linkits7688d)
[ "$1" = "upgrade" ] && status_led="mediatek:orange:wifi"
......
......@@ -226,6 +226,9 @@ ramips_board_detect() {
*"HC5861")
name="hc5861"
;;
*"HC5962")
name="hc5962"
;;
*"HG255D")
name="hg255d"
;;
......
......@@ -228,6 +228,10 @@ platform_check_image() {
}
return 0
;;
hc5962)
# these boards use metadata images
return 0
;;
ubnt-erx)
nand_do_platform_check "$board" "$1"
return $?;
......@@ -260,6 +264,7 @@ platform_pre_upgrade() {
local board=$(ramips_board_name)
case "$board" in
hc5962|\
ubnt-erx)
nand_do_upgrade "$ARGV"
;;
......
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "HiWiFi HC5962";
memory@0 {
device_type = "memory";
reg = <0x0 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "hc5962:white:status";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
system {
label = "hc5962:red:system";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "debug";
reg = <0x80000 0x80000>;
read-only;
};
factory: partition@100000 {
label = "factory";
reg = <0x100000 0x40000>;
read-only;
};
partition@140000 {
label = "kernel";
reg = <0x140000 0x200000>;
};
partition@340000 {
label = "ubi";
reg = <0x340000 0x1E00000>;
};
partition@2140000 {
label = "hw_panic";
reg = <0x2140000 0x80000>;
read-only;
};
partition@21c0000 {
label = "bdinfo";
reg = <0x21c0000 0x80000>;
read-only;
};
partition@2240000 {
label = "backup";
reg = <0x2240000 0x80000>;
read-only;
};
partition@22c0000 {
label = "overly";
reg = <0x22c0000 0x1000000>;
};
partition@32c0000 {
label = "firmware_backup";
reg = <0x32c0000 0x2000000>;
};
partition@52c0000 {
label = "oem";
reg = <0x52c0000 0x200000>;
};
partition@54c0000 {
label = "opt";
reg = <0x54c0000 0x2ac0000>;
};
};
&pcie {
status = "okay";
pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x0000>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
pcie1 {
mt76@1,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "uart3", "jtag";
ralink,function = "gpio";
};
};
};
......@@ -71,6 +71,21 @@ define Device/firewrt
endef
TARGET_DEVICES += firewrt
define Device/hc5962
DTS := HC5962
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 2097152
UBINIZE_OPTS := -E 5
IMAGE_SIZE := $(ralink_default_fw_size_32M)
IMAGES += factory.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
DEVICE_TITLE := HiWiFi HC5962
DEVICE_PACKAGES := kmod-usb3 kmod-mt76
endef
TARGET_DEVICES += hc5962
define Device/mt7621
DTS := MT7621
BLOCKSIZE := 64k
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment