Commit a4260eaa authored by Sungbo Eo's avatar Sungbo Eo Committed by Adrian Schmutzler
Browse files

ath79: fix MAC address setup for TP-Link TL-WDR3600/TL-WDR4300



The current ethernet MAC address setup of TL-WDR4300 board is different
from the setup of stock firmware:

OpenWrt: lan = label_mac -2, wan = label_mac -2
  stock: lan = label_mac,    wan = label_mac +1

The full address assignment is as follows:
LAN  label
WAN  label + 1
5G   label
2G   label - 1

This patch changes all devices using TL-WDR4300 board:
TL-WDR3600 v1 (checked on device)
TL-WDR4300 v1 (checked on device)
TL-WDR4300 v1 (IL)
Signed-off-by: default avatarSungbo Eo <mans0n@gorani.run>
[rephrase/extend commit title/message]
Signed-off-by: default avatarAdrian Schmutzler <freifunk@adrianschmutzler.de>
parent 102c8c55
......@@ -116,7 +116,6 @@
pll-data = <0x06000000 0x00000101 0x00001616>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-2)>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
......
......@@ -390,6 +390,12 @@ ath79_setup_macs()
base_mac=$(mtd_get_mac_binary info 0x8)
wan_mac=$(macaddr_add "$base_mac" 1)
;;
tplink,tl-wdr3600-v1|\
tplink,tl-wdr4300-v1|\
tplink,tl-wdr4300-v1-il)
base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
wan_mac=$(macaddr_add "$base_mac" 1)
;;
trendnet,tew-823dru)
lan_mac=$(mtd_get_mac_text mac 0x4)
wan_mac=$(mtd_get_mac_text mac 0x18)
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment