Commit 640a36aa authored by Adrian Schmutzler's avatar Adrian Schmutzler
Browse files

ath79: DTS style improvement for Ubiquiti XM and BZ devices



This applies minor style improvements and removes commented pll
clock adjustments from ubnt_xm DTSI. The latter were introduced
(already commented out) when adding ath79 target and have never
been touched since then. For Unifi (BZ board), similar clock
adjustments are employed and used.
Signed-off-by: default avatarAdrian Schmutzler <freifunk@adrianschmutzler.de>
parent b7c58a1e
......@@ -15,7 +15,7 @@
label-mac-device = &wifi;
};
airrouter-leds {
leds {
compatible = "gpio-leds";
led_globe: globe {
......
......@@ -78,30 +78,30 @@
read-only;
};
partition@1 {
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0x750000>;
};
partition@3 {
partition@7a0000 {
label = "board_config";
reg = <0x7a0000 0x010000>;
read-only;
};
partition@4 {
partition@7b0000 {
label = "cfg";
reg = <0x7b0000 0x040000>;
read-only;
};
art: partition@5 {
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
......
......@@ -9,12 +9,6 @@
compatible = "ubnt,xm", "qca,ar7241";
model = "Ubiquiti Networks XM (rev 1.0) board";
/* extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
*/
keys {
compatible = "gpio-keys";
......@@ -30,12 +24,9 @@
status = "okay";
};
/*&pll {
clocks = <&extosc>;
};*/
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
......@@ -54,30 +45,30 @@
read-only;
};
partition@1 {
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0x750000>;
};
partition@3 {
partition@7a0000 {
label = "board_config";
reg = <0x7a0000 0x010000>;
read-only;
};
partition@4 {
partition@7b0000 {
label = "cfg";
reg = <0x7b0000 0x040000>;
read-only;
};
art: partition@5 {
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
......
......@@ -11,6 +11,7 @@
leds {
compatible = "gpio-leds";
link1 {
label = "ubnt:red:link1";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment