Commit 45fefa04 authored by Sungbo Eo's avatar Sungbo Eo Committed by Adrian Schmutzler
Browse files

ramips: set uImage name of WeVO 11AC NAS and W2914NS v2



The stock firmware and bootloader only accept uImage with names that
match certain patterns. This patch enables OpenWrt installation from
stock firmware without having to reflash the bootloader or access the
UART console.

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Signed-off-by: default avatarSungbo Eo <mans0n@gorani.run>
(cherry picked from commit 19800ac0

)
[backported]
Signed-off-by: default avatarAdrian Schmutzler <freifunk@adrianschmutzler.de>
parent b0d99e32
......@@ -44,6 +44,7 @@ endef
define Device/11acnas
DTS := 11ACNAS
IMAGE_SIZE := $(ralink_default_fw_size_16M)
UIMAGE_NAME := 11AC-NAS-Router(0.0.0)
DEVICE_TITLE := WeVO 11AC NAS Router
DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-ledtrig-usbport wpad-mini
endef
......@@ -334,6 +335,7 @@ TARGET_DEVICES += vr500
define Device/w2914nsv2
DTS := W2914NSV2
IMAGE_SIZE := $(ralink_default_fw_size_16M)
UIMAGE_NAME := W2914NS-V2(0.0.0)
DEVICE_TITLE := WeVO W2914NS v2
DEVICE_PACKAGES := \
kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-mini
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment