Skip to content
  • Sungbo Eo's avatar
    ramips: add support for ZIO FREEZIO · 0375c076
    Sungbo Eo authored
    
    
    ZIO FREEZIO is a 2.4/5GHz band AC1200 router, based on MediaTek MT7621A.
    
    Specifications:
    - SoC: MT7621AT
    - RAM: DDR3 128MB
    - Flash: SPI NOR 16MB
    - WiFi:
      - 2.4GHz: MT7603EN
      - 5GHz: MT7612EN
    - Ethernet: 5x 10/100/1000Mbps
      - Switch: SoC internal
    - USB: 1x 3.0
    - UART:
      - J4: 3.3V, RX, TX, GND (3.3V is the square pad) / 57600 8N1
    
    Notes:
    - FREEZIO has almost the same board as WeVO W2914NS v2.
    - Stock firmware is based on OpenWrt BB.
    
    MAC addresses in factory partition:
    0x0004: WiFi 2.4GHz (label_mac-8)
    0x002e: WAN (label_mac)
    0x8004: WiFi 5GHz (label_mac-4)
    0xe000: LAN (label_mac+1)
    
    Installation via web interface:
    1.  Access web admin page and turn on "OpenWrt UI mode".
    2.  Flash sysupgrade image through LuCI, with the "Keep settings" option
        OFF.
    
    Revert to stock firmware:
    1.  Perform sysupgrade with stock image.
        Make sure to NOT preserve settings.
    
    Signed-off-by: default avatarSungbo Eo <mans0n@gorani.run>
    [rebase, use mt7621_wevo_w2914ns-v2.dtsi]
    Signed-off-by: default avatarAdrian Schmutzler <freifunk@adrianschmutzler.de>
    0375c076