olinuxino_configs issueshttp://staging.olimex.com/hehopmajieh/olinuxino_configs/-/issues2018-12-17T16:37:13Zhttp://staging.olimex.com/hehopmajieh/olinuxino_configs/-/issues/3'create_simple_image.sh' script creates image but warns sectors "Value out of...2018-12-17T16:37:13ZMitko Gamishev'create_simple_image.sh' script creates image but warns sectors "Value out of range"*Created by: sanjumn*
The 'create_simple_image.sh' script, downloaded from following link, does create an image but warns sectors "value out of range"
https://github.com/hehopmajieh/olinuxino_configs/blob/master/A64-OLinuXino/Tools/cre...*Created by: sanjumn*
The 'create_simple_image.sh' script, downloaded from following link, does create an image but warns sectors "value out of range"
https://github.com/hehopmajieh/olinuxino_configs/blob/master/A64-OLinuXino/Tools/create_simple_image.sh
Following is the sequence of messages displayed after executing 'create_simple_image.sh' script:
--------------------------------------------------------------------------------------------------------------
mypc@ubuntu:~/A64-OLinuXino$ ./create_simple_image.sh Olinuxino-A64.img
Creating image Olinuxino-A64.img of size 100 MiB ...
++ dd if=/dev/zero bs=1M count=20 of=Olinuxino-A64.img
20+0 records in
20+0 records out
20971520 bytes (21 MB, 20 MiB) copied, 0.0335225 s, 626 MB/s
++ dd if=blobs/boot0.bin conv=notrunc bs=1k seek=8 of=Olinuxino-A64.img
32+0 records in
32+0 records out
32768 bytes (33 kB, 32 KiB) copied, 0.0103312 s, 3.2 MB/s
++ dd if=build/u-boot-with-dtb.bin conv=notrunc bs=1k seek=19096 of=Olinuxino-A64.img
922+0 records in
922+0 records out
944128 bytes (944 kB, 922 KiB) copied, 0.00143412 s, 658 MB/s
++ dd if=/dev/zero bs=1M count=50 of=Olinuxino-A64.img1
50+0 records in
50+0 records out
52428800 bytes (52 MB, 50 MiB) copied, 0.155965 s, 336 MB/s
++ mkfs.vfat -n BOOT Olinuxino-A64.img1
mkfs.fat 3.0.28 (2015-05-16)
++ dd if=Olinuxino-A64.img1 conv=notrunc oflag=append bs=1M seek=20 of=Olinuxino-A64.img
50+0 records in
50+0 records out
52428800 bytes (52 MB, 50 MiB) copied, 0.164734 s, 318 MB/s
++ rm -f Olinuxino-A64.img1
++ dd if=/dev/zero bs=1M count=30 of=Olinuxino-A64.img2
30+0 records in
30+0 records out
31457280 bytes (31 MB, 30 MiB) copied, 0.0300564 s, 1.0 GB/s
++ mkfs.ext4 -F -b 4096 -E stride=2,stripe-width=1024 -L rootfs Olinuxino-A64.img2
mke2fs 1.42.13 (17-May-2015)
Discarding device blocks: done
Creating filesystem with 7680 4k blocks and 7680 inodes
Allocating group tables: done
Writing inode tables: done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done
++ dd if=Olinuxino-A64.img2 conv=notrunc oflag=append bs=1M seek=70 of=Olinuxino-A64.img
30+0 records in
30+0 records out
31457280 bytes (31 MB, 30 MiB) copied, 0.0633444 s, 497 MB/s
++ rm -f Olinuxino-A64.img2
++ fdisk Olinuxino-A64.img
++ cat
Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table.
Created a new DOS disklabel with disk identifier 0xd5a9e211.
Command (m for help): Created a new DOS disklabel with disk identifier 0xb1762524.
Command (m for help): Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p): Partition number (1-4, default 1): First sector (2048-204799, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (40960-204799, default 204799):
Created a new partition 1 of type 'Linux' and of size 50 MiB.
Command (m for help): Selected partition 1
Partition type (type L to list all types): Changed type of partition 'Linux' to 'W95 FAT32 (LBA)'.
Command (m for help): Partition type
p primary (1 primary, 0 extended, 3 free)
e extended (container for logical partitions)
Select (default p): Partition number (2-4, default 2): First sector (2048-204799, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (143360-204799, default 204799): Last sector, +sectors or +size{K,M,G,T,P} (143360-204799, default 204799): **Value out of range.**
Last sector, +sectors or +size{K,M,G,T,P} (143360-204799, default 204799): **Value out of range.**
Last sector, +sectors or +size{K,M,G,T,P} (143360-204799, default 204799): Last sector, +sectors or +size{K,M,G,T,P} (143360-204799, default 204799):
Do you really want to quit? ++ sync
++ cleanup
++ '[' -d /tmp/tmp.swwxoyRGNc ']'
++ rm -rf /tmp/tmp.swwxoyRGNc
mypc@ubuntu:~/A64-OLinuXino$
-------------------------------------------------------------------------------------------------------------- http://staging.olimex.com/hehopmajieh/olinuxino_configs/-/issues/2Android4.2-v3.02018-01-03T21:33:20ZMitko GamishevAndroid4.2-v3.0*Created by: gr4527*
There seem to be a problem regarding paths in the Android4.2-v3.0 archive and olinuxino-a20 BSP.
When compiling there is an error saying "make: *** No
rule to make target `device/softwinner/wing-k70/tablet_core_ha...*Created by: gr4527*
There seem to be a problem regarding paths in the Android4.2-v3.0 archive and olinuxino-a20 BSP.
When compiling there is an error saying "make: *** No
rule to make target `device/softwinner/wing-k70/tablet_core_hardware.xml".
This file is located in different subfolder - "configs" in the wing-k70 folder.
http://staging.olimex.com/hehopmajieh/olinuxino_configs/-/issues/1Wrong build order in the description2017-08-16T08:36:24ZMitko GamishevWrong build order in the description*Created by: DanKoloff*
Wrong build order in the text. ATF and Allwinner Pack Tools must be made before performing u-boot script. Else errors appear. The order at the Teres repository seems correct: https://github.com/A64-TERES/scripts *Created by: DanKoloff*
Wrong build order in the text. ATF and Allwinner Pack Tools must be made before performing u-boot script. Else errors appear. The order at the Teres repository seems correct: https://github.com/A64-TERES/scripts